 The UltraSonic 2001 TouchFree car wash is by design the "best of the
best" in touchfree car washing. One look at its modern attractive appearance will
tell you RYKO took out all of the stops designing this machine for today's marketplace.
When it comes to cleaning, the UltraSonic Wash has: Pre-Soak nozzles positioned for
thorough coverage, Hi-Impact technology for best possible surface impact and utilizes a
state-of-the-art PLC controller. The UltraSonic Wash is truly the best of the best when it
comes to touchfree car washing.
When it comes to cleaning, the UltraSonic Wash has: Pre-Soak nozzles positioned for thorough coverage, Hi-Impact technology for best possible surface impact and utilizes a state-of-the-art PLC controller. The UltraSonic Wash is truly the best of the best when it comes to touchfree car washing. The Monarch and the Ultrasonic 2001 are Touch-free Systems. The Monarch system normally requires an equipment room for pump bench services. The Ultrasonic 2001 has all services onboard, ie. high pressure pump, hot water heater and boost pump. |
||
| Features | ||
| Tri-Foam Foaming Pre-Soak Side Panel Blaster |
Wheel Blaster Underbody Rotating Wash Arm |
UltraSonic Vehicle Sizing Air Dryer Hi-Impact Pump |
 |
The Overhead applies tri-colored foam from each side of the gantry. Spotlights mounted in the Overhead gantry highlight the wash experience as the vehicle is covered with colorful and fragrant tri-foam in only seconds. |
|
Vehicle is covered with a layer of pre-soak detergent to loosen dirt and road grime, giving a more thorough wash. Two-step chemical capabilities insure satisfying wash results for extremely hard to clean vehicles. |
|
 |
The side panel blaster directs a concentrated water flow at hard to clean areas such as the rocker panels and wheel wells. A large oscillating spray nozzle applies the Hi-Impact water on both sides of the vehicle in the same pass. |
|
The wheel blaster electronically locates each set of wheels and oscillates as it directs a force of Hi-Impact water against the entire tire and wheel area including the wheel wells. |
 |
 |
The underbody wash (oscillating or fixed) directs steady streams of water to the underbody removing dirt, mud and salt. An optional Rust Inhibitor is also available. |
Automatically detect the size of the vehicle during the Pre-Soak pass. The "intelligent" rotating wash arm then maintains the optimum distance from the vehicle during the Hi-Impact wash for the best wash quality. |
 |
 |
Optional on-board air dryers provide a customer-pleasing dry - the most demanded menu choice. A stand-alone dryer, the ThrustPro, is available as an option. |
|
The Hi-Impact Pump, designed to produce the force necessary to provide a quality touchfree wash, is mounted on board to allow for easier installation of the UltraSonic 2001. The pump gantry mounting prevents drop, resulting in a better quality wash and enhanced cleaning. |
 |
Specifications
are subject to change without notice.
This page and the contents herein are the property of National Wash Inc.
Permission is required for the use of any images or information.
© Rose Sovey 2008
© Creative Design Stephen Woolf/Copyright 1999. Web Weavers
